how to measure distance between nodes in midas civil

According to actual construction steps, corresponding construction stages are defined in Midas / Civil finite element analysis softwareExcept for the No.0 blockeach construction block of the, main beam is divided into a unit. All three commands work in Civil 3D version 2015 or later. At the Select Starting Point prompt, type 'PN and press Enter.There are 3708 nodes in the whole bridge model, and 9048 units are divided. Initially I was just looking for a way how to measure the distance of e.g.This specifies that you will be entering Civil 3D COGO point values instead of selecting coordinate points on the screen. MEASURE DISTANCE BETWEEN NODES IN MIDAS CIVIL HOW TOĪt the Enter Point Number prompt, enter the starting COGO point number and press Enter. Now, I see that it is better to use features like Mesh Metric and Name selections to check the mesh quality.Įdge of a mesh element (or distance between two nodes) and for that purpose the Hit Point Feature that you suggested gives a fast overview. The coordinates of the COGO point appear in the command line history. At the Enter Point Number prompt, enter the COGO point number for the endpoint and press Enter.

This command reports horizontal distance and elevation difference. It also reports the point elevations along with the grade and slope between the points. Notice that the distance shown is a horizontal distance, not a slope distance that is the result reported when using the DISTANCE or MEASUREGEOM command. Note: Although the command shows that the 'PN transparent command is still running, the CGSLIST command has reverted to the original Select Object or prompt. To continue specifying COGO points, you need to press Esc to exit the 'PN transparent command and then type P and press Enter to return to Points selection. Finally, type 'PN and press Enter to return to the 'PN transparent command. MEASURE DISTANCE BETWEEN NODES IN MIDAS CIVIL HOW TO.

How to measure distance between nodes in midas civil